Notes on the installation of window and door hardware and maintenance issues

avqvqwv
fdvq

I believe that we are not unfamiliar with window and door hardware, it is a part of our installation, which is indispensable for windows and doors, and it is because of their existence that the appearance and role of windows and doors tend to be perfect. Whether the use of windows and doors is long and installation is inseparable, then we need to pay attention to those specific matters in the installation? How do we go about maintaining them after installation? Here we will look at them together.

1. Door and window hardware corrosion is very important, if the hardware rust, will affect the function of the doors and windows and the performance, its service life will also be reduced, and thus affect the energy-saving effect of the doors and windows.

2. Atmospheric quality: under normal circumstances, only the oxygen in the air will corrode the metal, but with the development of industrialisation in the world, the harmful gases and dust in the air have also increased in large quantities, such as carbon dioxide, sulphur dioxide and other gases produced by the burning of coal and petrol

3. Humidity: because the moisture in the air condensed into a liquid water film is the formation of the necessary conditions for corrosion cells, when the humidity reaches a certain critical value of the formation of water film on the surface, the corrosion rate increased.

4. Temperature: high temperature and high humidity, the temperature rises to accelerate corrosion, the longer the humidity, corrosion is also more serious.

And the maintenance of door and window hardware, the key lies in the following 4 points.

1. Stainless steel handles and other stainless steel "hardware" can be used to bright cleaning agent scrub, can increase the brightness.

2. Hinges, hanging wheels, casters and other moving parts in the long-term movement may be due to dust adhesion and reduce the function, every six months fiddling one to two drops of lubricant can keep its smooth.

3. Extra attention should be paid to the direction of rotation and stretching of the puller, avoid using dead weight. Especially to teach children, do not hang on the door handle swing, both prone to danger and may form a hazard to the inner door.

4. Lock cylinder rotation is not sensitive, can be scraped from the pencil core on a small amount of black powder, lightly blow into the lock hole. This is due to the graphite component is a very good solid lubricant. Do not drip into the lubricant, as this will be more likely to adhere to the dust.

The above is for everyone in the installation of door and window hardware matters needing attention and maintenance methods, only in these small places properly maintained, the use of doors and windows can be more permanent. Doors and windows in our lives can play a big role can be small, but we will generally choose the house when the doors and windows will be large, not only is the breathable effect can also make the whole house become more bright, the above is to ask you about some of the content of the doors and windows, I hope it can help you.


Post time: Mar-21-2022